Panel Systems – GlazeGuard® 1000 System

Panel Systems – GlazeGuard® 1000 System

glazeguard1000panelbig GlazeGuard® 1000 is a composite panel for use as a glazing infill made by laminating two prefinished aluminum skins to substrates of tempered hardboard. These stabilizers surround a expanded polystyrene (EPS) or isocyanurate (ISO) foam core.

These panels are designed for use as a replacement or complement to glass in windows, storefront, modesty screens, railing inserts, etc.

Similar in thickness to GlazeGuard® 1000 WR (both are 1″), these panels offer more impact resistance than the lightweight composition offered by the plastic

Installation Overview :
GlazeGuard® panels are installed in aluminum glazing/storefront channels (by others) typically on setting blocks and sealed using rubber gaskets. Since they are encapsulated on all four sides by this channel, no mechanical fasteners, adhesives, or moldings are used in the installation of these panels

View Mock Up Of Installation

Composition & Materials

Component Standard (in) Metric (mm)
Prefinished Textured Aluminum Skins
(or) Prefinished Smooth Aluminum Skins
(or) Porcelain Enamel Steel Skins
.010″
.024″
28ga
254mm
.609mm
.390mm
Tempered Hardboard Stabilizers 1/8″ 3.18mm
Expanded Polystyrene Foam (EPS) Core
(or) Polyisocyanurate Foam (ISO) Core
11/16″
11/16″
17.5mm
17.5mm



Panel Weight & Thickness

Property Standard (in) Metric (mm)
Panel Weight 2.08 lbs/ft² 10.2 kg/m²
Nominal Thickness 1″ 25mm



Size & Available

Property Standard (in) Metric (mm)
4′ x 8′ 48″ x 96″ (1219mm x 2438mm)
4′ x 10′ 48″ x 120″ (1219mm x 3048mm)
4′ x 12′ 448″ x 144″ (1219mm x 3658mm)
5′ x 8′ 60″ x 96″ (1524mm x 2438mm)
5′ x 10′ 60″ x 120″ (1524mm x 3048mm)
5′ x 12′ 60″ x 144″ (1524mm x 3658mm)

Click links below for available finishes

Textured Finishes
Smooth Finishes
Metallic & Anodized Finishes

Leave a Reply